Olimex MSP430-JTAG-TINY-V2 Programmer hub-motoren current consumption only 2

current consumption only 2

and the continuous rating of 23 A is dependent on various conditions

Es werden lediglich vier AA-Batterien (wir empfehlen unsere 2100mAH Akkus oder 2500mAh Akkus) und ein USB-A zu Micro-B Kabel für die Programmierung zusätzlich benötigt

this sensor provides an attractive alternative to shorter-range LED-phototransistor reflectance pairs and longer-range but slower sensors such as the Sharp GP2Y0A21YK0F analog distance sensor

Read from all sensor outputs: analog voltage

Olimex MSP430-JTAG-TINY-V2 Programmer hub-motoren current consumption only 2Features: Program all MSP430Fxxx flash microcontrollers Ultra fast programming 14KB s faster several times than TI USB FET (1. 4 KB s with spy bi wire) Uses TI standard 2x7 pin JTAG connector Spy By Wire support for the newest TI MSP430 devices Can supply target with 3. 3V fixed voltage 50mA maximum current, no short circuit protection(!) MSP430. dll makes it compatible with all existing software which works with TI USB FET (emulates TI USB FET)